Class: SSS 3
Term: Second Term
Subject: Basic Electronics
Time: 2 Hours 30 Minutes
Total Marks: 70
SECTION A: OBJECTIVES (40 Marks)
Instruction: Answer ALL 40 questions. Each question carries 1 mark.
- Which opportunity most directly matches the electronics skills listed in the curriculum? (a) Servicing mobile phones and electronic control units (b) Offering software services unrelated to electronic devices or support (c) Selling imported components without quality or compatibility checks (d) Repairing only the outer casing while refusing electronics diagnostics
- A technician plans to start a GSM-repair enterprise. Which order is most responsible? (a) Borrow heavily before identifying required equipment (b) Advertise repairs that cannot be performed (c) Purchase unrelated stock instead of essential test tools (d) Study demand, estimate equipment and skill requirements, cost operations, then seek funding
- Why is a start-up budget needed before leasing a repair workshop? (a) It estimates fixed and variable costs and the funds required to begin operations (b) It fixes all future prices for the life of the business (c) It eliminates the need for customer demand (d) It ensures competition cannot arise
- The main reason a mobile handset can maintain service while moving across coverage areas is that ________. (a) A handset communicates only through one permanently attached wire (b) A SIM card eliminates the need for radio links (c) The cellular network can transfer its radio connection between cells or base stations (d) Every base station uses a fixed wired path directly to a subscriber’s handset
- All these can be elements of a servo position-control system EXCEPT ________. (a) a position or motion sensor (b) a controller and actuator (c) a desired setpoint (d) an unrelated customer advertising invoice acting as the position sensor
- Why is a realistic reserve for equipment failure important in a repair-business budget? (a) Reserves should cover only planned inventory purchases, not unexpected repairs (b) Every tool has an infinite useful life (c) Diagnostic tools can fail or need replacement, creating unplanned cash demands (d) A reserve automatically guarantees higher customer demand
- A controller that acts solely according to a preset timer without comparing actual output uses ________ control. (a) error-corrected (b) open-loop (c) adaptive servo (d) closed-loop feedback
- Which sequence best represents closed-loop servo control? (a) Output → power isolation → end of all sensing (b) Actuator → advertising budget → transistor shop → setpoint (c) Reference → fixed timer with no observed output (d) Setpoint → comparison with feedback → controller → actuator → measured output
- All the following are useful electronics-business management practices EXCEPT ________. (a) buying counterfeit components without evaluating safety or customer trust (b) establishing realistic prices (c) keeping parts and repair records (d) monitoring cash flow and stock levels
- Which observation best distinguishes a working closed-loop servo from a fixed-duration actuator? (a) It has no way to use sensor information (b) It responds to deviations between measured output and the requested target (c) It produces only an unmeasured output (d) It stops after an unchanging time regardless of position
- ________ is the process by which information is divided into manageable units for transmission across a packet-switched network. (a) Wheel alignment (b) Signal quantisation exclusively in analogue amplifiers (c) Mechanical balancing (d) Packetisation
- All these are normal functions of mobile communication networks EXCEPT ________. (a) managing subscriber access and radio resources (b) guaranteeing uninterrupted reception regardless of distance or signal blockage (c) connecting calls between users (d) handling handover where network design supports it
- A service business has adequate revenue but loses customers after repairs fail repeatedly. Which action addresses the underlying operational weakness? (a) Increase advertising while ignoring repair failures (b) Remove customer complaint records permanently (c) Implement diagnostics, trained repairs, final testing and warranty follow-up (d) Buy unrelated goods rather than suitable replacement parts
- An open-loop timer closes a door for a fixed duration; a closed-loop controller uses a position sensor. The main advantage of the latter is ________. (a) a guarantee that sensors can never fail (b) the ability to correct for variations using actual door position (c) complete removal of power or mechanical limits (d) operation with no reference value
- ________ is the difference between a desired reference position and the actual measured output in a servo-system. (a) Budget surplus (b) Carrier wave (c) Input impedance (d) Error signal
- Which statement about a servo system is NOT defensible? (a) The controller may vary drive to reduce position error (b) A badly calibrated sensor can never affect positioning accuracy (c) Feedback enables correction under changing conditions (d) The error signal may change as the output moves
- Which of the following functions belongs most directly to an Internet router? (a) Converting a microphone into a loudspeaker (b) Generating all web page content at each intermediary node (c) Forwarding packets between networks according to addressing information (d) Printing every transmitted file automatically
- A shop sells a replacement part at ₦15,000. Purchase cost is ₦9,000 and attributable service expenses are ₦2,000. The contribution remaining is ________. (a) ₦4,000 (b) ₦11,000 (c) ₦2,000 (d) ₦6,000
- A circuit that measures its output and uses the result to correct its operation is a ________ control system. (a) open-loop (b) closed-loop (c) unpowered (d) isolated display-only
- An automated car boot stops at a selected angle even when the load changes. Which control principle most likely supports this behaviour? (a) A timer alone measures the actual boot-lid position (b) The motor is run for one fixed duration irrespective of load (c) Position feedback adjusts motor operation toward a setpoint (d) The door is disconnected from all sensors
- ________ is the financial projection showing when cash enters and leaves an electronics business. (a) A servo position trace (b) A Boolean truth table (c) A carrier oscillator (d) A cash-flow forecast
- Which assumption about Internet operation is NOT valid? (a) A delivered web page proves every packet crossed the same physical route (b) Network addressing supports routing decisions (c) A request can pass through several network devices (d) Data can be split into packets
- Why should a repair enterprise retain customer authorisation before replacing expensive parts? (a) It makes testing instruments unnecessary (b) It eliminates the need for diagnosis (c) It supports transparency about cost, scope and responsibility (d) It guarantees that no component will ever fail again
- A plan estimating expected receipts and expenditure over a defined period is a ________. (a) feedback loop (b) budget (c) base station (d) server route
- A control loop overshoots its target repeatedly and oscillates around the desired position. Which cause should be evaluated? (a) An absent receipt for unrelated repair work (b) The colour of the Ethernet cable (c) Excessive controller gain or inappropriate feedback tuning (d) An unprinted business name on the enclosure
- The correct step in diagnosing a handset that cannot register on its mobile network is to ________. (a) Check service coverage, SIM/account status, network settings and handset radio condition (b) Open the charging port while power is applied (c) Replace the phone’s loudspeaker before checking service (d) Assume every outgoing call failure proves the battery is flat
- An electronics repair entrepreneur has profitable sales on paper but cannot buy replacement parts when needed. Which weakness is most likely? (a) Too many well-documented inventory checks (b) A guaranteed absence of overhead costs (c) Poor cash-flow planning despite nominal profit (d) An excess of servo feedback accuracy
- Which of these is not a credible source of lawful start-up funding for an electronics enterprise? (a) A properly assessed cooperative loan (b) Personal savings (c) Equity contributions from partners (d) Permanent financing by ignoring every existing debt and tax obligation
- Which of these is not an appropriate role for a feedback sensor in an automatic-door system? (a) Providing motive power to drive the entire door directly without an actuator (b) Providing data that may modify the controller’s action (c) Reporting position or the presence of an obstruction (d) Allowing comparison with the intended output
- How does a GSM cellular link differ from a wired Internet connection at the user device? (a) Both require exactly the same radio antenna placement (b) GSM uses a radio interface to a base station, whereas wired access uses a physical medium (c) GSM removes the need for any networking or switching (d) Wired access uses only satellite reflections
- Which claim about GSM phones is NOT correct? (a) The SIM alone provides radio coverage without a network (b) Network authentication helps manage access (c) Cell networks divide coverage into service areas (d) The handset requires a suitable radio link
- Two users request different web pages through the same network link. Which mechanism best explains how the Internet can carry both exchanges? (a) Each page requires a dedicated uninterrupted copper wire to every server (b) The modem converts all URLs into mechanical movement (c) All packets must travel in a single global fixed order (d) Addressed packets share transmission resources and are routed to their destinations
- Which of these is not a characteristic of feedback control? (a) Feedback can help correct errors (b) The output is never measured or compared with the desired value (c) A controller may adjust an actuator based on an error signal (d) A reference or target can be defined
- In a GSM network, a station that communicates by radio with nearby handsets serves as a ________. (a) oscillator-only power supply (b) logic inverter (c) base station (d) hydraulic actuator
- A remote-controlled door opens but fails to stop at the intended position. Which fault-finding step is most relevant? (a) Check limit/position sensing, calibration and the control response (b) Change the workshop’s accounting software first (c) Replace the control panel before checking feedback signals (d) Increase motor drive indefinitely without position checks
- Why is feedback important in a servo-system operating under changing mechanical loads? (a) It ensures that actuators need no power (b) It makes the controller independent of the requested position (c) It prevents any possibility of a sensor fault (d) It allows corrective actuation when the actual position deviates from the target
- A light beam interrupted by a vehicle in an automatic gate installation is detected by a ________ sensor. (a) fuel-level (b) temperature-only (c) photoelectric (d) hydraulic-pressure-only
- Which distinction between initial capital and working capital matters in electronics enterprise planning? (a) Both mean the profit after tax in every period (b) Initial capital establishes the business; working capital supports day-to-day operations (c) Initial capital can never purchase equipment (d) Working capital is used only to design a satellite orbit
- A photoelectric sensor prevents a powered door from closing on an obstacle. What role does the sensor play? (a) It supplies environmental feedback for safe control decisions (b) It acts as the primary drive motor (c) It determines the correct opening speed from motor current alone (d) It changes the door’s paint colour
- Two electronics shops have similar revenue. Shop A tracks parts usage and warranty returns; Shop B keeps no records. Which management conclusion is strongest? (a) Record keeping has no bearing on service quality (b) The shop with fewer records must have less risk (c) Equal revenue guarantees identical profitability (d) Shop A has better information for detecting costs, losses and recurring faults
SECTION B: THEORY (30 Marks)
Instruction: Answer Question 1 and any other TWO questions. Each question carries 10 marks.
1. Answer the following questions.
(a) Explain five meaningful stages in a user’s request for a web page through the Internet. (5 marks)
(b) A GSM phone has network-registration failures while others nearby work. Propose five diagnostic checks. (5 marks)
2. Answer the following questions.
(a) Draw or describe in words the components of a closed-loop servo for an automatic door and explain five distinct functions. (5 marks)
(b) A powered boot lid overshoots its target and occasionally closes on an obstruction. Explain five control and safety improvements. (5 marks)
3. Answer the following questions.
(a) A start-up electronics workshop forecasts ₦480,000 income and ₦365,000 total spending for its first period. Calculate the projected surplus and explain three limitations of relying on the estimate alone. (5 marks)
(b) Design five expenditure headings for a start-up mobile-phone repair enterprise. (5 marks)
4. Answer the following questions.
(a) Evaluate five management choices that can build trust and profitability in an electronics repair business. (5 marks)
(b) Distinguish open-loop from closed-loop control in five ways relevant to accuracy, feedback and mechanical load variation. (5 marks)
OBJECTIVE MARKING SCHEME
Question 1 – ✅ (a) Servicing mobile phones and electronic control units
Question 2 – ✅ (d) Study demand, estimate equipment and skill requirements, cost operations, then seek funding
Question 3 – ✅ (a) It estimates fixed and variable costs and the funds required to begin operations
Question 4 – ✅ (c) The cellular network can transfer its radio connection between cells or base stations
Question 5 – ✅ (d) an unrelated customer advertising invoice acting as the position sensor
Question 6 – ✅ (c) Diagnostic tools can fail or need replacement, creating unplanned cash demands
Question 7 – ✅ (b) open-loop
Question 8 – ✅ (d) Setpoint → comparison with feedback → controller → actuator → measured output
Question 9 – ✅ (a) buying counterfeit components without evaluating safety or customer trust
Question 10 – ✅ (b) It responds to deviations between measured output and the requested target
Question 11 – ✅ (d) Packetisation
Question 12 – ✅ (b) guaranteeing uninterrupted reception regardless of distance or signal blockage
Question 13 – ✅ (c) Implement diagnostics, trained repairs, final testing and warranty follow-up
Question 14 – ✅ (b) the ability to correct for variations using actual door position
Question 15 – ✅ (d) Error signal
Question 16 – ✅ (b) A badly calibrated sensor can never affect positioning accuracy
Question 17 – ✅ (c) Forwarding packets between networks according to addressing information
Question 18 – ✅ (a) ₦4,000
Question 19 – ✅ (b) closed-loop
Question 20 – ✅ (c) Position feedback adjusts motor operation toward a setpoint
Question 21 – ✅ (d) A cash-flow forecast
Question 22 – ✅ (a) A delivered web page proves every packet crossed the same physical route
Question 23 – ✅ (c) It supports transparency about cost, scope and responsibility
Question 24 – ✅ (b) budget
Question 25 – ✅ (c) Excessive controller gain or inappropriate feedback tuning
Question 26 – ✅ (a) Check service coverage, SIM/account status, network settings and handset radio condition
Question 27 – ✅ (c) Poor cash-flow planning despite nominal profit
Question 28 – ✅ (d) Permanent financing by ignoring every existing debt and tax obligation
Question 29 – ✅ (a) Providing motive power to drive the entire door directly without an actuator
Question 30 – ✅ (b) GSM uses a radio interface to a base station, whereas wired access uses a physical medium
Question 31 – ✅ (a) The SIM alone provides radio coverage without a network
Question 32 – ✅ (d) Addressed packets share transmission resources and are routed to their destinations
Question 33 – ✅ (b) The output is never measured or compared with the desired value
Question 34 – ✅ (c) base station
Question 35 – ✅ (a) Check limit/position sensing, calibration and the control response
Question 36 – ✅ (d) It allows corrective actuation when the actual position deviates from the target
Question 37 – ✅ (c) photoelectric
Question 38 – ✅ (b) Initial capital establishes the business; working capital supports day-to-day operations
Question 39 – ✅ (a) It supplies environmental feedback for safe control decisions
Question 40 – ✅ (d) Shop A has better information for detecting costs, losses and recurring faults
THEORY MARKING SCHEME (Answer 3 × 10 = 30 Marks)
Question 1 (10 Marks)
(a) 5 marks: Client request, address/name resolution, packet transmission/routing, server response and reassembly/display; 1 each.
(b) 5 marks: SIM/service status, network selection, handset radio, coverage comparison, software settings, antenna/hardware; any five 1 each.
Question 2 (10 Marks)
(a) 5 marks: Setpoint, comparator/error, controller, motor/actuator, position sensor/feedback; 1 each.
(b) 5 marks: Tune gain, calibrate sensor, position limit, photoelectric obstacle detection, fail-safe stop, testing; any five 1 each.
Question 3 (10 Marks)
(a) 5 marks: Surplus ₦115,000 (2); liquidity/timing, demand uncertainty, equipment failure, warranty cost or other three 1 each.
(b) 5 marks: Tools/diagnostics, premises, components, salaries, power/internet, marketing, safety/contingency; five 1 each.
Question 4 (10 Marks)
(a) 5 marks: Honest diagnostics, clear quote, safe parts, testing, warranty policy, records, inventory controls; any five 1 each.
(b) 5 marks: Output measurement, setpoint comparison, correction, sensor reliance, response to disturbances/complexity; 1 each.

Community Join the conversation Open discussion +