Class: SSS 3
Term: Second Term
Subject: Basic Electricity
Time: 2 Hours 30 Minutes
Total Marks: 70
SECTION A: OBJECTIVES (40 Marks)
Instruction: Answer ALL 40 questions. Each question carries 1 mark.
- The decimal value represented by \(11001_2\) is ________. (a) \(19\) (b) \(25\) (c) \(27\) (d) \(17\)
- The main reason for converting between digital number representations is that ________. (a) Every number base uses the same place values (b) Binary is valid only in analogue amplifiers (c) Different representations can encode the same numerical value and must be interpreted consistently (d) Hexadecimal digits can never represent binary groups
- Which of these is not equal to \(16_{10}\)? (a) \(1111_2\) (b) \(10_{16}\) (c) \(20_8\) (d) \(10000_2\)
- In octal notation, \(17_8\) is equivalent to ________ in decimal notation. (a) \(21\) (b) \(15\) (c) \(17\) (d) \(19\)
- A digital control circuit must produce high output when exactly one of two sensors is high. The appropriate gate is ________. (a) XOR (b) AND (c) NOR (d) NAND
- A gate schematic is copied with inputs reversed. Why does this not change the result for an ordinary AND gate? (a) The output always remains high (b) An AND gate has no inputs (c) AND is a single-input inversion (d) The Boolean AND operation is commutative
- Which statement best compares the NAND and AND gates? (a) NAND requires no logical inputs (b) NAND is a mechanical version of an AND gate (c) NAND outputs the logical complement of AND for the same inputs (d) NAND and AND always give identical outputs
- All the following are valid digits for hexadecimal notation EXCEPT ________. (a) F (b) G (c) 9 (d) A
- The binary number \(101101_2\) has the decimal value ________. (a) \(45_{10}\) (b) \(37_{10}\) (c) \(53_{10}\) (d) \(41_{10}\)
- A warning lamp should light whenever either of two fault switches is active, including when both are active. Which gate is best? (a) XOR (b) NOT (c) AND (d) OR
- Why is a truth table useful when selecting a logic gate for a control circuit? (a) It identifies the physical colour of the silicon (b) It guarantees no mechanical fault will occur (c) It displays the output associated with every possible input combination (d) It measures line voltage without a meter
- Which of the following hexadecimal representations corresponds to 255 in base ten? (a) \(100_{16}\) (b) \(FF_{16}\) (c) \(F0_{16}\) (d) \(EF_{16}\)
- Which of these is not a valid interpretation of a logic-gate output of 0? (a) It may represent the false state for that logic function (b) It depends on the gate and its inputs (c) It can be the correct output of an AND gate (d) It necessarily means the entire device has no supply power
- All of the following support appliance troubleshooting EXCEPT ________. (a) checking power supply and connection integrity (b) verifying safe operation after the corrective action (c) substituting an unverified high-current fuse for a correctly rated protective device (d) recording the reported symptom
- A fan hums but its blades will not start. Which approach supports proper diagnosis? (a) Increase the fuse rating without examining the motor (b) Assume the blade colour is causing the fault (c) Force the motor to run by bypassing all protection (d) Isolate supply, check for mechanical obstruction and examine starting components
- The correct step in converting a non-negative decimal integer to binary is to ________. (a) Subtract a fixed ten from each digit (b) Perform repeated division by two and read the remainders in reverse order (c) Write the decimal number unchanged and append a base-two subscript (d) Multiply each decimal digit by sixteen and ignore carries
- The decimal number \(74_{10}\) is represented in binary as ________. (a) \(1001010_2\) (b) \(1001100_2\) (c) \(1010010_2\) (d) \(1000110_2\)
- A refrigerator trips an RCD when its compressor starts. What is the strongest initial diagnostic inference? (a) Every RCD trip indicates a harmless change in temperature (b) Possible earth leakage or an insulation fault requires investigation (c) The decimal number system has become corrupted (d) The refrigerator must be operating more efficiently
- For inputs \(A=0\) and \(B=1\), which pair of outputs is correct for OR and AND, respectively? (a) \(0,1\) (b) \(1,1\) (c) \(1,0\) (d) \(0,0\)
- ________ is the gate that reverses a single binary input. (a) AND (b) OR (c) XOR (d) NOT
- An appliance cable is visibly frayed but the appliance still operates. What is the best professional conclusion? (a) The cable requires replacement or approved repair before continued use (b) The appliance should be used until it first trips a breaker (c) Successful operation proves the insulation is safe (d) Wrapping the entire unit in cloth is a permanent repair
- Which of these equations is NOT correct? (a) \(8_{10}=1000_2\) (b) \(10_{10}=1010_2\) (c) \(15_{10}=F_{16}\) (d) \(12_{10}=1010_2\)
- How does an XOR gate differ from an OR gate for two high inputs? (a) Both necessarily output 0 (b) XOR outputs 0 while OR outputs 1 (c) XOR outputs 1 while OR outputs 0 (d) Neither produces a defined output
- An appliance that uses a temperature-sensitive switch to regulate heating commonly contains a ________. (a) bridge rectifier only (b) binary inverter only (c) thermostat (d) router
- For an AND gate with inputs \(A=1\) and \(B=0\), the output is ________. (a) \(2\) (b) \(A+B\) (c) \(1\) (d) \(0\)
- Which of these is not an acceptable first step when troubleshooting a faulty appliance? (a) Touch exposed live terminals while the device remains energised (b) Examine supply and plug condition (c) Inspect for visible damage or burning (d) Disconnect safely before inspection
- All these behaviours are possible for a two-input NAND gate EXCEPT ________. (a) output 0 when both inputs are high (b) output 1 when one input is high and the other low (c) output 0 when only one input is high (d) output 1 when both inputs are low
- Two-bit words \(01_2\) and \(10_2\) are added. Their sum is ________. (a) \(11_2\) (b) \(10_2\) (c) \(101_2\) (d) \(100_2\)
- A repaired blender passes a basic functional test. What should the technician still verify before return? (a) That the motor speed has become infinite (b) That its packaging contains no numbers (c) That the selected fuse rating exceeds all likely operating currents (d) Earth or insulation safety where appropriate, cord condition and secure covers
- A repaired electric iron warms slowly while the rated supply is normal. Which investigation is most relevant? (a) Replace the cable colour without checking continuity (b) Check the heating element, thermostat contacts and their connections (c) Replace the mains fuse without checking the element or thermostat (d) Reprogram a network router before testing the heater
- Which input-output pair is correct for a two-input NOR gate? (a) Inputs 1,0 produce output 1 (b) Inputs 1,1 produce output 1 (c) Inputs 0,0 produce output 1 (d) Inputs 0,1 produce output 1
- Why should the cause of repeated fuse operation be established before a replacement is fitted? (a) An overload or fault may remain and create another hazardous condition (b) A larger fuse automatically makes the conductors safer (c) Replacing a fuse changes the national supply voltage (d) Repeated operation proves the fuse is always undersized
- A safety interlock must activate only when two separate switches are both closed. Which logical operation models this requirement? (a) OR (b) AND (c) NOT (d) XOR
- ________ is the decimal value of \(2F_{16}\). (a) \(42\) (b) \(63\) (c) \(47\) (d) \(35\)
- ________ is the number system in which each position represents a power of two. (a) Binary (b) Octal (c) Decimal (d) Hexadecimal
- Which assertion about XOR logic is NOT correct? (a) The output is high when the inputs differ (b) The output is low when both inputs are low (c) The output is high when both inputs are high (d) XOR can detect disagreement between two binary states
- The result of \(1011_2+110_2\) is ________. (a) \(10101_2\) (b) \(10001_2\) (c) \(11011_2\) (d) \(1111_2\)
- Which statement about positional number systems is NOT true? (a) Hexadecimal can compactly represent groups of binary bits (b) Binary uses only the symbols 0 and 1 (c) Each column has a weight determined by the base (d) The same symbol has identical place value at every position regardless of base
- Which distinction between repair and preventive maintenance is most accurate? (a) Repair corrects a fault; maintenance aims to preserve reliable service and reduce failure risk (b) Both mean replacing a working appliance after every use (c) Preventive maintenance must wait until catastrophic failure (d) Repair excludes all testing and verification
- The main purpose of measuring continuity through a power cord after an appliance failure is ________. (a) to determine the colour of the internal insulation (b) to calculate the device’s advertising value (c) to change a decimal number into binary (d) to establish whether the intended conductive path is intact
SECTION B: THEORY (30 Marks)
Instruction: Answer Question 1 and any other TWO questions. Each question carries 10 marks.
1. Answer the following questions.
(a) Convert 156 in base ten to binary and hexadecimal, showing the key steps. (5 marks)
(b) Add the binary numbers 101101 and 11011 and check the result in decimal. (5 marks)
2. Answer the following questions.
(a) Construct a two-input AND, OR and XOR truth table and explain how their outputs differ for inputs 1 and 1. (5 marks)
(b) Describe five practical conditions in which one of NOT, AND, OR, NAND or XOR would be a suitable logic function. (5 marks)
3. Answer the following questions.
(a) A domestic electric fan hums but does not turn. Outline five safe steps to diagnose the problem. (5 marks)
(b) Compare five aspects of preventive maintenance and reactive repair on electrical appliances. (5 marks)
4. Answer the following questions.
(a) Design a simple two-sensor alarm that activates whenever either sensor is triggered. Identify the gate and explain four aspects of its operation. (5 marks)
(b) Explain five reasons appliance maintenance and repair must be performed with correct safety and testing procedures. (5 marks)
OBJECTIVE MARKING SCHEME
Question 1 – ✅ (b) \(25\)
Question 2 – ✅ (c) Different representations can encode the same numerical value and must be interpreted consistently
Question 3 – ✅ (a) \(1111_2\)
Question 4 – ✅ (b) \(15\)
Question 5 – ✅ (a) XOR
Question 6 – ✅ (d) The Boolean AND operation is commutative
Question 7 – ✅ (c) NAND outputs the logical complement of AND for the same inputs
Question 8 – ✅ (b) G
Question 9 – ✅ (a) \(45_{10}\)
Question 10 – ✅ (d) OR
Question 11 – ✅ (c) It displays the output associated with every possible input combination
Question 12 – ✅ (b) \(FF_{16}\)
Question 13 – ✅ (d) It necessarily means the entire device has no supply power
Question 14 – ✅ (c) substituting an unverified high-current fuse for a correctly rated protective device
Question 15 – ✅ (d) Isolate supply, check for mechanical obstruction and examine starting components
Question 16 – ✅ (b) Perform repeated division by two and read the remainders in reverse order
Question 17 – ✅ (a) \(1001010_2\)
Question 18 – ✅ (b) Possible earth leakage or an insulation fault requires investigation
Question 19 – ✅ (c) \(1,0\)
Question 20 – ✅ (d) NOT
Question 21 – ✅ (a) The cable requires replacement or approved repair before continued use
Question 22 – ✅ (d) \(12_{10}=1010_2\)
Question 23 – ✅ (b) XOR outputs 0 while OR outputs 1
Question 24 – ✅ (c) thermostat
Question 25 – ✅ (d) \(0\)
Question 26 – ✅ (a) Touch exposed live terminals while the device remains energised
Question 27 – ✅ (c) output 0 when only one input is high
Question 28 – ✅ (a) \(11_2\)
Question 29 – ✅ (d) Earth or insulation safety where appropriate, cord condition and secure covers
Question 30 – ✅ (b) Check the heating element, thermostat contacts and their connections
Question 31 – ✅ (c) Inputs 0,0 produce output 1
Question 32 – ✅ (a) An overload or fault may remain and create another hazardous condition
Question 33 – ✅ (b) AND
Question 34 – ✅ (c) \(47\)
Question 35 – ✅ (a) Binary
Question 36 – ✅ (c) The output is high when both inputs are high
Question 37 – ✅ (b) \(10001_2\)
Question 38 – ✅ (d) The same symbol has identical place value at every position regardless of base
Question 39 – ✅ (a) Repair corrects a fault; maintenance aims to preserve reliable service and reduce failure risk
Question 40 – ✅ (d) to establish whether the intended conductive path is intact
THEORY MARKING SCHEME (Answer 3 × 10 = 30 Marks)
Question 1 (10 Marks)
(a) 5 marks: Binary 10011100 (2), hexadecimal 9C (2), clear working (1).
(b) 5 marks: Binary 1001000 (2), decimal operands 45 and 27 (1+1), verification 72 (1).
Question 2 (10 Marks)
(a) 5 marks: Correct rows for four input pairs across three gates (3), AND=1, OR=1, XOR=0 for 1,1 and sound comparison (2).
(b) 5 marks: Five correctly matched functional conditions, 1 each.
Question 3 (10 Marks)
(a) 5 marks: Isolate power, inspect mechanical load, cord/supply, start component, winding, and verify repaired function; five 1 each.
(b) 5 marks: Timing, purpose, checks, fault diagnosis, component replacement, documentation, safety; any five 1 each.
Question 4 (10 Marks)
(a) 5 marks: OR gate (1), input 00/01/10/11 outputs 0/1/1/1 (4).
(b) 5 marks: Isolation, leakage/insulation risk, correct rating, quality components, verification, records; any five 1 each.

Community Join the conversation Open discussion +