Class: SSS 3
Term: First Term
Subject: Fisheries
Time: 2 Hours 30 Minutes
Total Marks: 70
SECTION A: OBJECTIVES (40 Marks)
Instruction: Answer ALL 40 questions. Each question carries 1 mark.
- A small pond is almost drained and residual fish remain in shallow water. Which gear is particularly suitable? (a) Deep-sea trawl net (b) Large ocean longline (c) Scoop net (d) Industrial purse seine
- A selected fish is large but has immature reproductive products. The most defensible decision is to ________. (a) use size alone as proof that spawning will occur (b) withhold it from immediate breeding until reproductive readiness is established (c) transport it repeatedly to induce stress (d) strip it without assessment
- Which action does NOT support artificial-breeding success? (a) Selecting healthy breeders (b) Confirming gamete maturity (c) Handling breeders carefully (d) Using sexually immature or severely stressed brood fish without assessment
- ________ is the removal of the internal organs of a fish during processing. (a) De-gilling (b) De-scaling (c) De-gutting (d) Filleting
- Which action does NOT represent sound preparation before using a net for fishing? (a) Using torn netting without examining escape holes (b) Checking mesh and joins (c) Selecting suitable gear for the location (d) Repairing damaged sections
- ________ is the fishing method named in the scheme that relies on applying electric current rather than throwing or towing a net. (a) Trawling (b) Casting a net (c) Electrofishing (d) Gill-net fishing
- Which of the following distinguishes brining from freezing? (a) Brining uses a salt solution whereas freezing relies on low temperature (b) Brining requires a freezer below zero (c) Freezing depends on coating the fish in salt solution (d) Both methods remove the fish’s gills as the main preservation principle
- Which of these is not an example of a fish-market outlet? (a) Restaurant (b) A motor-armature rewind bench (c) Supermarket (d) Fishmonger
- The correct step when a freshly caught scaled fish is to be prepared for sale is to ________. (a) leave the fish unwashed in direct sun for an extended time (b) mix clean and dirty processing utensils without cleaning (c) carry out the required cleaning and gutting under hygienic conditions (d) package before removing obvious processing waste
- All these are fish-preservation methods in the teaching content except ________. (a) salting (b) smoking (c) freezing (d) grading fish by size after harvesting
- An example of a desirable brood-stock quality is ________. (a) active, healthy fish with mature reproductive organs (b) fish showing severe transport stress (c) fish with obviously damaged gills (d) very immature fish lacking developed gametes
- A breeder arrives after prolonged travel in midday heat. Which response best addresses the handling guidance? (a) Immediately subject the fish to repeated unnecessary netting (b) Reduce handling stress and allow suitable recovery before breeding procedures (c) Keep the fish out of water to encourage spawning (d) Ignore signs of stress because mature fish cannot be affected
- Which of these is not a fish-preservation method? (a) Canning (b) Salting (c) De-gutting alone (d) Dry smoking
- The ________ technique removes the head of a large fish where the processing plan requires it. (a) de-scaling (b) decapitation (c) de-gilling (d) brining
- Which action does NOT improve post-harvest fish quality? (a) Placing cleaned fish back on a contaminated processing table (b) Cleaning knives and cutting slabs (c) Removing unwanted internal matter appropriately (d) Washing with a suitable clean-water supply
- The correct step when choosing between smoking and freezing for a consignment is to ________. (a) assume all preservation methods need the same equipment (b) consider the desired shelf life, available facilities and product market (c) choose a method without considering product form (d) ignore the destination’s storage conditions
- A cast net repeatedly misses fish because its mesh and weights are damaged. The priority is to ________. (a) increase throwing effort without any inspection (b) replace the fishing craft with a processing table (c) continue fishing while ignoring tears (d) repair and check the net before the next deployment
- All these are harvesting gears mentioned in the scheme except ________. (a) a smoked-fish drying rack (b) a scoop net (c) a cast net (d) a trap
- The main reason motorised fishing craft are useful in appropriate commercial operations is that they ________. (a) make all fishing gears unnecessary (b) guarantee safe operation in any weather (c) can move fishing crews and gear with greater controlled propulsion than paddled craft (d) allow fish to be preserved without ice
- The main reason to match a fishing craft to its operating waters is to ________. (a) make every canoe suitable for open-sea trawling (b) eliminate all weather-related risk (c) replace maintenance of fishing equipment (d) ensure the craft and gear are suitable for the fishing conditions
- All these are fishing crafts mentioned in the scheme except ________. (a) dug-out canoe (b) a fish-harvesting landing platform (c) motorised canoe (d) trawler
- The correct step after moving brood stock to a breeding compartment is to ________. (a) strip every fish immediately regardless of maturity (b) crowd fish to increase handling pressure (c) allow a suitable settling period and observe reproductive condition (d) avoid recording its sex or condition
- The ________ are the reproductive products obtained from sexually mature fish and used in artificial breeding. (a) eggs and milt (b) gills and scales (c) skin and fins (d) liver and heart
- Which of the following is the best reason for combining correct processing and preservation? (a) Preservation can always correct every earlier contamination (b) Processing prepares a clean product and preservation delays deterioration (c) Cleaning is unnecessary if packaging is attractive (d) All preserved fish retain the same texture and value
- A retailer orders fish in individual consumer packs, while a hotel prefers bulk packs. This mainly shows that ________. (a) both markets must always use the same pack size (b) fish processing is unnecessary for hotels (c) the fishmonger can never act as an intermediary (d) packaging should be selected for the outlet and handling requirements
- The main reason brood fish may be transferred in the morning or late evening is to ________. (a) ensure that gametes disappear before collection (b) avoid every need for water quality control (c) reduce temperature-related transport stress (d) make all fish spawn during transport
- Which of the following best expresses the principal purpose of artificial breeding? (a) Replacing all post-harvest handling with smoking (b) Ensuring every captured wild fish is mature (c) Preventing all variation in brood-stock quality (d) Manipulating controlled spawning to obtain dependable fish seed
- The ________ method exposes processed fish to low temperatures to slow spoilage. (a) sun drying (b) freezing (c) wet smoking (d) salting
- When degutting and washing freshly harvested fish, all these are tools for the immediate operation except ________. (a) a rack used only for subsequent drying or smoking (b) a clean knife (c) a washing basin (d) a suitable cutting slab
- The ________ method captures fish by drawing a net through a water body with a suitable craft. (a) de-scaling (b) wet-smoking (c) trawling (d) filleting
- Which of the following gears is most directly associated with individual baited capture rather than a surrounding net? (a) Cast net (b) Gill net (c) Drag net (d) Hook and line
- A fisheries research team classifies a named technique that uses high-frequency sound rather than a cast or drag net. The technique is ________. (a) ultrasonic fishing technology (b) seine-net fishing (c) trap fishing (d) hook-and-line fishing
- The correct step when choosing packaging for fish being delivered to a hotel is to ________. (a) use contaminated containers because the buyer will cook the fish (b) ignore protection against crushing (c) choose packaging solely by decoration (d) select clean, suitable packaging and protect the product during transport
- Which of the following is a justified advantage of artificial breeding in fish farming? (a) More predictable access to quantities of fingerlings (b) A guarantee that all reared fish need no food (c) Complete removal of the need to select brood fish (d) Permanent elimination of any disease risk
- Which of the following is a common purpose of mending a damaged gill net? (a) Make the net impossible to deploy (b) Restore functional mesh and reduce unintended loss of catch (c) Convert the net into a motorised craft (d) Eliminate the need to choose the appropriate mesh
- ________ reduces moisture in fish principally by exposing it to sunlight and air under suitable conditions. (a) Freezing (b) Canning (c) Brining (d) Sun drying
- The main reason fish should be washed appropriately during processing is to ________. (a) guarantee the fish will never spoil (b) increase every fish’s original live weight (c) remove dirt and processing residues before further preservation (d) replace hygienic handling of processing equipment
- The ________ is a preservation approach that seals suitably processed fish in containers and applies controlled heat treatment. (a) filleting (b) de-gilling (c) impaling (d) canning
- Which action does NOT help maintain a fishing net’s serviceability? (a) Storing wet damaged netting permanently without inspection or repair (b) Repairing broken strands (c) Checking knots or mesh (d) Cleaning the net after use
- Which of the following identifies de-gilling correctly? (a) Removal of the backbone only (b) Removal of the gills during fish preparation (c) Removal of all moisture by drying (d) Removal of salt after brining
SECTION B: THEORY (30 Marks)
Instruction: Answer Question 1 and any other TWO questions. Each question carries 10 marks.
1. Answer the following questions.
(a) A fishing group must choose gear and a craft for pond and open-water operations. Compare FIVE suitable method or equipment decisions. (5 marks)
(b) Explain FIVE factors involved in constructing, inspecting and mending harvesting gears. (5 marks)
2. Answer the following questions.
(a) A cooperative catches fish for immediate sale and preservation. Outline FIVE steps in preparing the catch hygienically. (5 marks)
(b) Evaluate FIVE preservation and packaging decisions for fish being transported to hotels and retail shops. (5 marks)
3. Answer the following questions.
(a) A hatchery is selecting breeders. Explain FIVE criteria and handling decisions before artificial spawning. (5 marks)
(b) Describe FIVE steps or purposes of artificial breeding relevant to fingerling production. (5 marks)
4. Answer the following questions.
(a) A fish trader chooses among smoking, freezing, salting and canning. State FIVE factors that determine the commercially appropriate option. (5 marks)
(b) Explain FIVE important differences between primary and secondary fish markets and the roles of marketing outlets. (5 marks)
OBJECTIVE MARKING SCHEME
Question 1 – ✅ (c) Scoop net
Question 2 – ✅ (b) withhold it from immediate breeding until reproductive readiness is established
Question 3 – ✅ (d) Using sexually immature or severely stressed brood fish without assessment
Question 4 – ✅ (c) De-gutting
Question 5 – ✅ (a) Using torn netting without examining escape holes
Question 6 – ✅ (c) Electrofishing
Question 7 – ✅ (a) Brining uses a salt solution whereas freezing relies on low temperature
Question 8 – ✅ (b) A motor-armature rewind bench
Question 9 – ✅ (c) carry out the required cleaning and gutting under hygienic conditions
Question 10 – ✅ (d) grading fish by size after harvesting
Question 11 – ✅ (a) active, healthy fish with mature reproductive organs
Question 12 – ✅ (b) Reduce handling stress and allow suitable recovery before breeding procedures
Question 13 – ✅ (c) De-gutting alone
Question 14 – ✅ (b) decapitation
Question 15 – ✅ (a) Placing cleaned fish back on a contaminated processing table
Question 16 – ✅ (b) consider the desired shelf life, available facilities and product market
Question 17 – ✅ (d) repair and check the net before the next deployment
Question 18 – ✅ (a) a smoked-fish drying rack
Question 19 – ✅ (c) can move fishing crews and gear with greater controlled propulsion than paddled craft
Question 20 – ✅ (d) ensure the craft and gear are suitable for the fishing conditions
Question 21 – ✅ (b) a fish-harvesting landing platform
Question 22 – ✅ (c) allow a suitable settling period and observe reproductive condition
Question 23 – ✅ (a) eggs and milt
Question 24 – ✅ (b) Processing prepares a clean product and preservation delays deterioration
Question 25 – ✅ (d) packaging should be selected for the outlet and handling requirements
Question 26 – ✅ (c) reduce temperature-related transport stress
Question 27 – ✅ (d) Manipulating controlled spawning to obtain dependable fish seed
Question 28 – ✅ (b) freezing
Question 29 – ✅ (a) a rack used only for subsequent drying or smoking
Question 30 – ✅ (c) trawling
Question 31 – ✅ (d) Hook and line
Question 32 – ✅ (a) ultrasonic fishing technology
Question 33 – ✅ (d) select clean, suitable packaging and protect the product during transport
Question 34 – ✅ (a) More predictable access to quantities of fingerlings
Question 35 – ✅ (b) Restore functional mesh and reduce unintended loss of catch
Question 36 – ✅ (d) Sun drying
Question 37 – ✅ (c) remove dirt and processing residues before further preservation
Question 38 – ✅ (d) canning
Question 39 – ✅ (a) Storing wet damaged netting permanently without inspection or repair
Question 40 – ✅ (b) Removal of the gills during fish preparation
THEORY MARKING SCHEME (Answer 3 × 10 = 30 Marks)
Question 1 (10 Marks)
(a) 5 marks: Hook and line for individual fish (1); cast or gill nets where suitable (1); scoop nets during pond draining (1); canoe suited to sheltered waters (1); larger motorised craft or trawler for suitable operations (1).
(b) 5 marks: Select intended method or mesh (1); identify tears (1); repair broken strands (1); check knots or joins (1); clean and store gear correctly (1).
Question 2 (10 Marks)
(a) 5 marks: Handle promptly and cleanly (1); degut (1); degill or descale where required (1); wash suitably (1); prepare for the chosen preservation method (1).
(b) 5 marks: Appropriate smoking or drying (1); suitable freezing or cold chain (1); salting or canning where available (1); clean packaging (1); pack size or transport matching market (1).
Question 3 (10 Marks)
(a) 5 marks: Healthy or active fish (1); sexually mature eggs or milt (1); suitable size and condition (1); low-stress travel at cooler times (1); acclimatisation or observation before stripping (1).
(b) 5 marks: Select male and female mature brood fish (1); confirm gamete maturity (1); manage collection or controlled spawning (1); fertilisation or seed development (1); steady supply or improved quality of seed (1).
Question 4 (10 Marks)
(a) 5 marks: Shelf-life target (1); available equipment (1); transport or power facilities (1); buyer expectations (1); processing and packaging cost (1).
(b) 5 marks: Primary market near first sale (1); secondary resale market (1); fishmongers distribute (1); restaurants or hotels buy for food service (1); supermarkets offer retail access (1).

Community Join the conversation Open discussion +