Skip to content
HeadTeacher.ng
Examinations

Second Term Chemistry Examination for SS 3

SSS 3 Second Term Chemistry examination covering pollution, redox, qualitative ions. Includes 40 objective questions, theory and marking schemes.

Published Reading14 min Comments0

Class: SSS 3
Term: Second Term
Subject: Chemistry
Time: 2 Hours 30 Minutes
Total Marks: 70


SECTION A: OBJECTIVES (40 Marks)
Instruction: Answer ALL 40 questions. Each question carries 1 mark.

  1. In acid, \(25.0\,\mathrm{mL}\) of \(0.100\,\mathrm{mol\,L^{-1}}\) Fe²⁺ is titrated with \(0.0200\,\mathrm{mol\,L^{-1}}\) permanganate. The theoretical titre is ________. (a) \(5.0\,\mathrm{mL}\)    (b) \(125\,\mathrm{mL}\)    (c) \(25.0\,\mathrm{mL}\)    (d) \(50.0\,\mathrm{mL}\)
  2. Which method gives the most trustworthy titration result? (a) Average a rough titre with any wildly inconsistent trial    (b) Use concordant titres after a careful rough run and accurate burette readings    (c) Ignore the meniscus and use an estimated flask volume    (d) Measure the reacting volume by a laboratory spoon
  3. A colourless gas that bleaches damp litmus paper and has a characteristic choking odour may be ________. (a) hydrogen    (b) nitrogen    (c) chlorine    (d) carbon dioxide
  4. A sample of pale-green Fe²⁺ solution is left exposed to air and becomes brownish. Which change is most consistent with this observation? (a) Some Fe²⁺ is oxidised to Fe³⁺    (b) All iron ions are reduced to metallic iron spontaneously    (c) All iron is converted into carbonate by light    (d) The oxidation number of iron necessarily falls from +2 to +1
  5. Which statement about quantitative analysis is NOT sound? (a) Endpoint technique affects uncertainty    (b) A volume alone always determines concentration without stoichiometry    (c) Balanced equations determine mole relationships    (d) Accurate volumes support reliable concentration estimates
  6. ________ is the ion whose aqueous hydroxide precipitate commonly appears reddish-brown. (a) Fe³⁺    (b) Cu²⁺    (c) NH₄⁺    (d) Fe²⁺
  7. ________ is the reagent added to test for sulfate ions by forming a white, acid-insoluble sulfate precipitate under suitable conditions. (a) Benedict’s solution    (b) Iodine solution    (c) Aqueous starch    (d) Barium chloride solution
  8. In acidic solution, \(1\) mole of \(MnO_4^-\) reacts with how many moles of \(Fe^{2+}\)? (a) \(2\)    (b) \(5\)    (c) \(10\)    (d) \(1\)
  9. All of these observations are chemically consistent EXCEPT ________. (a) Fe²⁺ giving a pale-green hydroxide precipitate    (b) Fe³⁺ giving a reddish-brown hydroxide precipitate    (c) Cu²⁺ giving a blue hydroxide precipitate    (d) aqueous NH₄⁺ giving a brick-red Benedict precipitate as its required identification test
  10. Which observation is most characteristic when aqueous Cu²⁺ is treated with a limited amount of sodium hydroxide? (a) A blue precipitate of copper(II) hydroxide    (b) A pale-green precipitate of iron(II) hydroxide    (c) A colourless gas giving a pop    (d) A bright yellow precipitate of silver iodide
  11. In an acidified permanganate titration, the purple \(MnO_4^-\) ion is reduced to ________. (a) \(Mn^{7+}\)    (b) \(MnO_2\)    (c) \(Mn^{2+}\)    (d) \(Mn^{4+}\)
  12. Why should a redox titration reaction be balanced before calculating the unknown concentration? (a) The reaction’s colour determines the number of atoms    (b) The choice of indicator changes the conservation of matter    (c) One mole of any reagent always reacts with one mole of every other reagent    (d) The balanced equation fixes the electron and mole ratios between titrant and analyte
  13. A solution treated with sodium hydroxide gives a pale-green precipitate that darkens on exposure to air. Which ion is most likely? (a) NH₄⁺    (b) Ba²⁺    (c) Fe²⁺    (d) Cu²⁺
  14. Why is a confirmatory test useful after a first precipitate is observed in qualitative analysis? (a) Different ions can produce similar initial appearances, so further reactions improve specificity    (b) Every white precipitate consists of the same salt    (c) Confirmatory tests remove the need to control contamination    (d) A positive colour test proves the identity of every dissolved ion
  15. The correct step in preparing a permanganate titration of Fe²⁺ is to ________. (a) Add a strong reducing agent to the permanganate before measurement    (b) Interpret any purple stain as the initial burette reading    (c) Use alkaline conditions to assume the same Mn²⁺ stoichiometry    (d) Use a suitable dilute acid medium and clean titration apparatus
  16. A factory reduces its effluent concentration but doubles the volume released. Why might regulators still need to evaluate total pollutant load? (a) Total pollutant mass depends on concentration multiplied by discharge volume    (b) Lower concentration always means zero pollutant mass    (c) Environmental standards are unrelated to measured quantities    (d) Discharge volume can never influence environmental impact
  17. Which statement about redox titration is NOT correct? (a) Reduction involves electron gain    (b) The endpoint always proves that the solution contains no other substances    (c) Oxidation involves electron loss    (d) Stoichiometry relates the reacting amounts at equivalence
  18. Which of these is not an appropriate role of a government agency managing industrial chemical pollution? (a) Accepting unverified claims in place of required monitoring and enforcement    (b) Inspecting compliance records    (c) Setting legally supported discharge standards    (d) Enforcing corrective measures when breaches occur
  19. The number of moles of electrons gained by \(MnO_4^-\) when it forms \(Mn^{2+}\) in acid is ________. (a) \(1\)    (b) \(3\)    (c) \(7\)    (d) \(5\)
  20. Which of these is not a correct qualitative indicator of chloride ion in a suitable acidified solution? (a) Solubility of the silver chloride precipitate in dilute ammonia    (b) Formation of silver chloride    (c) A deep-blue starch complex with iodine as the definitive chloride test    (d) A white precipitate with silver nitrate
  21. Which laboratory observation distinguishes Fe³⁺ from Cu²⁺ when dilute sodium hydroxide is added to separate solutions? (a) Fe³⁺ releases ammonia gas while Cu²⁺ gives hydrogen    (b) Both always form the same green precipitate    (c) Neither solution reacts with hydroxide ions    (d) Fe³⁺ forms a reddish-brown precipitate while Cu²⁺ forms a blue precipitate
  22. ________ involves the use of laws, standards and enforcement to limit harmful industrial chemical releases. (a) Uncontrolled effluent disposal    (b) Environmental regulation    (c) Electroplating    (d) Informal colour coding alone
  23. An unknown sample releases a gas that turns limewater milky. Which additional inference is most defensible? (a) The gas must have been oxygen from every source    (b) The cation must be Fe³⁺ without testing    (c) Carbon dioxide is indicated; further tests are needed to determine the original compound fully    (d) Every sample producing this gas contains only calcium carbonate
  24. All of these are appropriate features of a responsible chemical-waste policy EXCEPT ________. (a) concealing repeated violations by refusing independent laboratory tests    (b) safe treatment and regulated disposal    (c) source reduction and process controls    (d) reliable monitoring records
  25. Why does acidified permanganate often act as its own indicator? (a) The endpoint is observed by smelling ammonia    (b) It forms an intense blue starch complex before every redox reaction    (c) It stops reacting once the titration flask is shaken    (d) A slight persistent excess produces a faint pink colour after the reducing agent is consumed
  26. The main reason measurable discharge standards are adopted is that ________. (a) They make analytical sampling unnecessary    (b) They permit consistent assessment, compliance decisions and enforcement    (c) They guarantee no industry will ever produce waste    (d) They replace every process for waste minimisation
  27. All of the following are reasons to rinse a burette with titrant before filling EXCEPT ________. (a) to limit dilution of the titrant    (b) to improve reliability of measured concentration    (c) to deliberately dilute the titrant by retaining significant amounts of rinse water    (d) to remove residues of the previous solution
  28. Which of the following environmental monitoring results gives regulators the strongest basis for enforcement? (a) Verified pollutant measurements compared with applicable discharge limits    (b) A single unverified sample with no stated collection method    (c) A company slogan promising clean production    (d) A single photograph of an office reception
  29. The gas that commonly gives a squeaky pop when a lighted splint is applied is ________. (a) carbon dioxide    (b) oxygen    (c) hydrogen    (d) ammonia
  30. A gas turns damp red litmus paper blue and forms white fumes when exposed to hydrogen chloride vapour. What is the gas? (a) Oxygen    (b) Ammonia    (c) Carbon dioxide    (d) Hydrogen
  31. The oxidation of iodide to iodine and reduction of iodine back to iodide are related because ________. (a) both require iodide to lose electrons    (b) both necessarily form insoluble hydroxides    (c) neither involves any change in oxidation state    (d) they are reverse electron-transfer changes involving the same redox couple
  32. A student accidentally overshoots the permanganate endpoint. Which response is appropriate? (a) Repeat a titration with careful dropwise addition near the endpoint    (b) Add more reducing agent without recording the amount    (c) Subtract an arbitrary volume and declare the trial concordant    (d) Use the overshot result as a standard for all later runs
  33. Which inference from adding dilute acid to an unknown carbonate is NOT justified? (a) The released gas may turn limewater milky    (b) Effervescence alone proves the exact cation present    (c) Further tests may be required to identify the counter-ion    (d) The acid can release carbon dioxide
  34. Which of these is not a reliable test for oxygen? (a) Relighting a glowing splint    (b) Distinguishing it from carbon dioxide using a glowing splint    (c) Supporting combustion under suitable conditions    (d) A squeaky-pop sound with a lighted splint as the primary identification
  35. Why is recording the actual burette difference better than relying only on the final reading? (a) Delivered volume is obtained by multiplying the two readings    (b) Only the last digit of the final reading matters    (c) The delivered volume is the final reading minus the initial reading    (d) The initial reading is always zero by definition
  36. A solution containing ammonium ions releases ________ gas on warming with sodium hydroxide. (a) carbon dioxide    (b) ammonia    (c) hydrogen chloride    (d) oxygen
  37. How do oxidation and reduction occur in an Fe²⁺/permanganate reaction? (a) Fe²⁺ loses an electron while permanganate accepts electrons in acid    (b) Permanganate must become an anion with a higher oxidation number    (c) The iron ion is reduced to Fe³⁺    (d) Both species simultaneously gain electrons
  38. Which description best distinguishes a strong oxidising agent from a strong reducing agent? (a) Both donate electrons exclusively    (b) An oxidant is always a metal while a reductant is always a gas    (c) Neither undergoes any oxidation-state change    (d) An oxidant accepts electrons; a reductant donates electrons in a reaction
  39. An unknown gives a white precipitate with acidified barium chloride that persists in dilute acid. Which anion is indicated? (a) Nitrate    (b) Carbonate    (c) Sulfate    (d) Chloride
  40. An industrial plant meets a daily production target but releases untreated acidic effluent to a stream. Which control strategy is most defensible? (a) Permit disposal without measuring pollutant load    (b) Require monitoring, treatment and compliance with enforceable discharge standards    (c) Assume dilution always eliminates the hazard regardless of discharge rate    (d) Classify the waste as safe because it leaves the factory

SECTION B: THEORY (30 Marks)
Instruction: Answer Question 1 and any other TWO questions. Each question carries 10 marks.

1. Answer the following questions.
(a) In acid medium, write the ionic redox equation for permanganate reacting with Fe²⁺ and explain the electron balance. (5 marks)
(b) Calculate the volume of 0.0200 mol L⁻¹ permanganate required to oxidise 25.0 mL of 0.100 mol L⁻¹ Fe²⁺. (5 marks)

2. Answer the following questions.
(a) Plan five tests for identifying Fe²⁺, Fe³⁺, Cu²⁺, NH₄⁺ and sulfate ions in separate unknown samples. (5 marks)
(b) Explain five precautions for producing reliable quantitative titration measurements. (5 marks)

3. Answer the following questions.
(a) A company releases wastewater into a river. Develop five complementary chemical-waste controls that regulators could verify. (5 marks)
(b) Explain five reasons concentration alone may be insufficient to judge an industrial waste discharge. (5 marks)

4. Answer the following questions.
(a) Describe five confirmatory observations useful for identifying gases such as H₂, O₂, NH₃, CO₂ and Cl₂. (5 marks)
(b) Explain five ways redox principles or qualitative tests support sound analysis of unknown chemical samples. (5 marks)


OBJECTIVE MARKING SCHEME
Question 1 – ✅ (c) \(25.0\,\mathrm{mL}\)
Question 2 – ✅ (b) Use concordant titres after a careful rough run and accurate burette readings
Question 3 – ✅ (c) chlorine
Question 4 – ✅ (a) Some Fe²⁺ is oxidised to Fe³⁺
Question 5 – ✅ (b) A volume alone always determines concentration without stoichiometry
Question 6 – ✅ (a) Fe³⁺
Question 7 – ✅ (d) Barium chloride solution
Question 8 – ✅ (b) \(5\)
Question 9 – ✅ (d) aqueous NH₄⁺ giving a brick-red Benedict precipitate as its required identification test
Question 10 – ✅ (a) A blue precipitate of copper(II) hydroxide
Question 11 – ✅ (c) \(Mn^{2+}\)
Question 12 – ✅ (d) The balanced equation fixes the electron and mole ratios between titrant and analyte
Question 13 – ✅ (c) Fe²⁺
Question 14 – ✅ (a) Different ions can produce similar initial appearances, so further reactions improve specificity
Question 15 – ✅ (d) Use a suitable dilute acid medium and clean titration apparatus
Question 16 – ✅ (a) Total pollutant mass depends on concentration multiplied by discharge volume
Question 17 – ✅ (b) The endpoint always proves that the solution contains no other substances
Question 18 – ✅ (a) Accepting unverified claims in place of required monitoring and enforcement
Question 19 – ✅ (d) \(5\)
Question 20 – ✅ (c) A deep-blue starch complex with iodine as the definitive chloride test
Question 21 – ✅ (d) Fe³⁺ forms a reddish-brown precipitate while Cu²⁺ forms a blue precipitate
Question 22 – ✅ (b) Environmental regulation
Question 23 – ✅ (c) Carbon dioxide is indicated; further tests are needed to determine the original compound fully
Question 24 – ✅ (a) concealing repeated violations by refusing independent laboratory tests
Question 25 – ✅ (d) A slight persistent excess produces a faint pink colour after the reducing agent is consumed
Question 26 – ✅ (b) They permit consistent assessment, compliance decisions and enforcement
Question 27 – ✅ (c) to deliberately dilute the titrant by retaining significant amounts of rinse water
Question 28 – ✅ (a) Verified pollutant measurements compared with applicable discharge limits
Question 29 – ✅ (c) hydrogen
Question 30 – ✅ (b) Ammonia
Question 31 – ✅ (d) they are reverse electron-transfer changes involving the same redox couple
Question 32 – ✅ (a) Repeat a titration with careful dropwise addition near the endpoint
Question 33 – ✅ (b) Effervescence alone proves the exact cation present
Question 34 – ✅ (d) A squeaky-pop sound with a lighted splint as the primary identification
Question 35 – ✅ (c) The delivered volume is the final reading minus the initial reading
Question 36 – ✅ (b) ammonia
Question 37 – ✅ (a) Fe²⁺ loses an electron while permanganate accepts electrons in acid
Question 38 – ✅ (d) An oxidant accepts electrons; a reductant donates electrons in a reaction
Question 39 – ✅ (c) Sulfate
Question 40 – ✅ (b) Require monitoring, treatment and compliance with enforceable discharge standards


THEORY MARKING SCHEME (Answer 3 × 10 = 30 Marks)
Question 1 (10 Marks)
(a) 5 marks: MnO4−+8H++5Fe²⁺→Mn²⁺+4H2O+5Fe³⁺ (3); Fe oxidation/Mn reduction correctly explained (2).
(b) 5 marks: Moles Fe²⁺=0.00250 (1), stoichiometric ratio 5:1 (2), moles MnO4−=0.000500 (1), volume=25.0 mL (1).
Question 2 (10 Marks)
(a) 5 marks: Fe²⁺ green OH, Fe³⁺ brown OH, Cu²⁺ blue OH, NH₄⁺ NH3 on NaOH warming, sulfate BaSO4 white acid-stable; 1 each.
(b) 5 marks: Clean/rinse glassware, meniscus reading, remove bubbles, careful endpoint, concordance, balanced stoichiometry; five 1 each.
Question 3 (10 Marks)
(a) 5 marks: Discharge limits, sampling, treatment, process substitution, monitoring records, enforcement or penalties; any five 1 each.
(b) 5 marks: Volume, total mass loading, toxicity, persistence, receiving water, timing/exposure; any five 1 each.
Question 4 (10 Marks)
(a) 5 marks: H2 pop, O2 relights splint, NH3 red litmus blue/white fumes, CO2 limewater milky, Cl2 bleaches damp litmus; 1 each.
(b) 5 marks: Oxidant/reductant electron transfer, oxidation state, correct reagent, observation/control, stoichiometry, confirmatory test; five correct 1 each.

Export this post
Second Term Chemistry Examination for SS 3
About the author

Royal Alikor

Royal Alikor is an educator with six years of classroom teaching and three years of elementary school leadership experience. He develops and reviews practical, curriculum-aligned learning materials for Nigerian schools.

Community Join the conversation Open discussion +