Class: SSS 3
Term: First Term
Subject: Garment Making
Time: 2 Hours 30 Minutes
Total Marks: 70
SECTION A: OBJECTIVES (40 Marks)
Instruction: Answer ALL 40 questions. Each question carries 1 mark.
- The ________ should be checked before cutting a gathered skirt attached to a baby’s bodice. (a) width of the facing only (b) depth of the bodice neckline (c) required skirt fullness and joining length (d) length of the sleeve cap only
- Which statement about finance from the owner’s savings is most defensible? (a) It guarantees higher profit than any borrowing arrangement (b) It avoids contractual loan interest but still commits money with an opportunity cost (c) It cannot reduce the owner’s liquidity (d) It carries the same contractual interest as a commercial loan
- The main reason to separate business cash receipts from the owner’s private spending is to ________. (a) remove the need for any sales records (b) guarantee that all customer orders yield a profit (c) make operating profitability and available working capital easier to assess (d) convert every cash purchase into a fixed asset
- Which of the following costs should be considered when pricing a garment, even if the tailor owns the sewing machine? (a) A reasonable allowance for machine wear and workshop facilities (b) The price of the fabric alone (c) Only the hours spent cutting (d) Only the value of accessories bought for the current order
- The lengthwise grainline marking on a skirt pattern should be ________. (a) placed at right angles to the selvage in every fabric (b) aligned with the fabric’s lengthwise grain as instructed by the pattern (c) rotated to fit the greatest number of pieces without checking grain (d) aligned with the bias for all skirts
- A maker’s total garment cost is ₦16,000. To earn a gross profit margin of 20% of the selling price, the minimum selling price is ________. (a) ₦20,000 (b) ₦19,200 (c) ₦16,800 (d) ₦24,000
- If a gown fits across the shoulders but pulls at the hip, what is the most appropriate response during fitting? (a) Remove all seam allowance from both hips (b) Shorten the sleeves to release hip ease (c) Identify the restricted area and adjust the relevant seams or pattern ease before final sewing (d) Finish the hem first to disguise the pulling
- Before a skirt pattern is laid on cloth, the fabric should first be ________. (a) smoothed, correctly grained and folded as required by the layout (b) cut to length and sewn before checking its grain (c) deliberately stretched along the fold (d) marked with chalk without smoothing or folding
- A waistband that consistently twists after assembly most likely requires ________. (a) increasing the hem allowance (b) shortening the bodice lining (c) pressing without checking the attachment seam (d) checking grain, waistband preparation and accurate attachment
- An order uses fabric costing ₦10,000, accessories ₦4,000 and labour ₦6,000. What is the direct production cost before overhead? (a) ₦20,000 (b) ₦16,000 (c) ₦24,000 (d) ₦14,000
- The ________ in a business-financing plan identifies the amount and timing of money required for operations. (a) fabric grainline (b) waist measurement (c) seam allowance (d) cash-flow forecast
- The principal purpose of introducing a princess seam into a jumper design is to ________. (a) create greater length by widening every hem (b) replace the need for fitting measurements (c) achieve shaping through a fitted style line and corresponding pattern divisions (d) remove the front opening completely
- Which of the following counts as a fixed or recurring operating commitment of a garment shop? (a) A single packet of replacement needles (b) Monthly rental for the workshop (c) Fabric used for a particular customer order (d) Thread purchased for one completed skirt
- A tailor adds a front facing to support a button-and-buttonhole opening. The facing mainly provides ________. (a) an additional unpressed seam allowance at the hem (b) an opening without reinforced edges (c) a substitute for marking the button positions (d) a clean, stable finish around the opening
- The correct step after adapting the jumper’s style lines on paper is to ________. (a) sew the original shirt pieces before checking the adaptation (b) transfer final pattern shapes and markings accurately before cutting (c) permanently join fabric panels without transferring markings (d) cut the fabric directly from the unverified rough sketch
- During a field visit to a sewing institution, which evidence would best support a proposed business plan? (a) Only the institution’s signboard (b) The personal clothing preferences of visitors (c) Actual workflow, equipment needs, staffing, quality checks and order pricing (d) The number of decorative posters in reception
- Gathering stitches on the dress skirt should be distributed so that ________. (a) fullness is even and matches the adjoining bodice edge (b) each gather is concentrated at the centre front (c) skirt length is reduced at random (d) the fullness exceeds the bodice length without distribution
- A tailor tacks a trouser before permanent sewing chiefly to ________. (a) replace all subsequent permanent stitches (b) test the fit and make corrections without removing a finished seam (c) eliminate the need for measurement and pattern checking (d) make it impossible to adjust seam allowances
- If ₦30,000 monthly shop rent is fairly allocated to 30 equal garment orders, how much rent should be included per order? (a) ₦1,000 (b) ₦100 (c) ₦900 (d) ₦10,000
- The main reason to sew the baby’s upper front and back together at the shoulders before finishing the neck is to ________. (a) attach the sleeves before the neckline is marked (b) sew the hem before any bodice joins (c) prevent adjustments to the opening during later work (d) establish the correct neckline assembly for the collar facing
- All these measures can support a small garment business EXCEPT ________. (a) checking prices and demand before agreeing to a job (b) training machinists to reduce defects (c) accepting repeated loss-making orders without reviewing costs or quality (d) recording material and labour expenditure
- A poorly matched sleeve-head circumference causes puckering at the armhole. What is the best response? (a) stretch the sleeve cap to any required length (b) Recheck the sleeve and armhole markings and distribute the intended ease correctly (c) cut away the entire armhole allowance (d) sew the sleeve without matching its notches
- The correct step before accepting a loan to finance an additional industrial sewing machine is to ________. (a) accept the loan whenever a lender offers it (b) assume extra production will always cover repayment (c) ignore maintenance and staff costs when forecasting (d) compare repayment obligations with realistic projected cash inflows
- ________ should occur before cutting the gown’s cloth to preserve the intended fit and drape. (a) Cutting straight through the folded fabric without a trial layout (b) Preparing, graining, folding and laying the patterns (c) Installing buttons and packaging the unfinished pieces (d) Sewing the neckline before drafting the gown pieces
- A tailor is adapting an existing shirt pattern into a jumper. Which practice best protects the original pattern while allowing alterations? (a) Cut directly through the original without copying it (b) Remove the original seam allowances permanently (c) Trace only one sleeve and estimate all other pieces (d) Trace the shirt pieces onto fresh pattern paper before changing their shapes
- In constructing a gown by the circular method, the intended purpose of loose stitching before final sewing is to ________. (a) eliminate the need to mark seam allowances (b) permit fitting, correction and alignment before permanent joining (c) substitute permanently for strong assembly stitching (d) avoid the fitting stage altogether
- A shop needs ₦120,000 for equipment and ₦40,000 for initial materials. With ₦70,000 of available savings, the uncovered financing requirement is ________. (a) ₦90,000 (b) ₦70,000 (c) ₦120,000 (d) ₦160,000
- Which of the following operations should precede cutting fabric for the adapted jumper? (a) sew the first available pieces without grain alignment (b) press the garment before drawing the pattern (c) Complete pattern tracing, adaptation, grainline marking and checking of the pieces (d) package the pieces before a trial layout
- The correct step after completing satisfactory fitting of a skirt is to ________. (a) remove all seam allowance before checking the fitting (b) skip marking the corrected seam lines (c) re-cut every piece without examining the required adjustment (d) stitch the corrected seam lines permanently and remove unnecessary tacking
- The principal danger of quoting a selling price using fabric costs alone is ________. (a) understating labour, electricity, rent and other production costs (b) overstating unavoidable fixed costs (c) automatically guaranteeing a 20% margin (d) treating the customer’s measurements as a cash cost
- Which choice best explains why pressing is integral to gown construction? (a) Pressing is useful only for removing fabric colour (b) It replaces the need to make accurate seams (c) Pressing should be postponed until after packaging (d) It helps flatten seam allowances and establish a controlled final appearance
- ________ is the appropriate technique for introducing controlled fullness into a pattern section. (a) Increasing stitch length throughout the entire garment (b) Slashing and spreading along planned lines (c) Cutting a facing without matching a corresponding opening (d) Shrinking the pattern by eliminating all seam allowances
- For a durable machine-finished skirt hem, a tailor should first ensure ________. (a) the hem is level, correctly turned and prepared before stitching (b) maximum possible hem length without reference to the intended style (c) a hemline set by estimating only the front length (d) hem stitching before the lower edge is levelled
- Which action does NOT support accurate freehand cutting of a baby dress? (a) checking garment sizes against recorded measurements (b) transferring needed cutting marks from the pattern (c) Estimating all bodice sizes without recording measurements (d) allowing for required seam and hem allowances
- The opening of a baby dress should be checked for ________. (a) an opening cut without securing its edges (b) a closure that overlaps in an arbitrary direction (c) leaving raw edges exposed for faster construction (d) alignment, adequate overlap or fastening and a secure finish
- Which action does NOT belong to the fitting-and-correction stage? (a) rechecking the marked seam lines after a trial fitting (b) taking in or releasing seams where appropriate (c) Packaging the garment before examining its fit (d) matching the corrected garment to the client’s measurements
- In a baby dress, chest width and upper-body length measurements mainly determine ________. (a) sleeve fullness only (b) the fit of the front and back upper sections (c) skirt hem depth only (d) the length of a separate decorative sash only
- A small garment business plans to employ a skilled machinist. This is primarily a requirement for ________. (a) marketing slogans without tailoring skills (b) the chosen shop paint colour (c) the number of empty hangers at reception (d) competent labour and production capacity
- Which treatment is most suitable for the neckline facing of a baby dress? (a) Trim the facing away before matching it to the neckline (b) Leave the neckline raw and rely on packaging (c) Attach accurately to the neckline, turn, secure and press for a clean finish (d) Stretch the neck opening until it matches an uncorrected facing
- All these are appropriate finishing operations EXCEPT ________. (a) leaving loose threads and visible tacking in a finished garment (b) pressing the finished seam allowances (c) trimming loose threads (d) checking that all fastenings work
SECTION B: THEORY (30 Marks)
Instruction: Answer Question 1 and any other TWO questions. Each question carries 10 marks.
1.
(a) Describe five stages in adapting an existing shirt pattern to a jumper with princess seams and a buttoned opening. (5 marks)
(b) Explain five accuracy checks to make before cutting fabric using the adapted pattern. (5 marks)
2.
(a) Outline five sequential operations for assembling a baby’s bodice and gathered skirt. (5 marks)
(b) A sleeve cap puckers after insertion. Analyse five checks or corrections before permanent sewing. (5 marks)
3.
(a) A garment costs ₦16,000 to make. Find its selling price for a 20% gross profit margin on selling price, and distinguish this from 20% markup on cost. (5 marks)
(b) A shop’s monthly rent is ₦30,000 allocated equally to 30 garment orders. Find rent per order and identify four other pricing costs. (5 marks)
4.
(a) Describe five steps from fitting a skirt through final pressing and packaging. (5 marks)
(b) Evaluate five financial considerations before a small garment maker borrows to purchase an industrial sewing machine. (5 marks)
Objective Marking Scheme
Question 1 – ✅ (c) required skirt fullness and joining length
Question 2 – ✅ (b) It avoids contractual loan interest but still commits money with an opportunity cost
Question 3 – ✅ (c) make operating profitability and available working capital easier to assess
Question 4 – ✅ (a) A reasonable allowance for machine wear and workshop facilities
Question 5 – ✅ (b) aligned with the fabric’s lengthwise grain as instructed by the pattern
Question 6 – ✅ (a) ₦20,000
Question 7 – ✅ (c) Identify the restricted area and adjust the relevant seams or pattern ease before final sewing
Question 8 – ✅ (a) smoothed, correctly grained and folded as required by the layout
Question 9 – ✅ (d) checking grain, waistband preparation and accurate attachment
Question 10 – ✅ (a) ₦20,000
Question 11 – ✅ (d) cash-flow forecast
Question 12 – ✅ (c) achieve shaping through a fitted style line and corresponding pattern divisions
Question 13 – ✅ (b) Monthly rental for the workshop
Question 14 – ✅ (d) a clean, stable finish around the opening
Question 15 – ✅ (b) transfer final pattern shapes and markings accurately before cutting
Question 16 – ✅ (c) Actual workflow, equipment needs, staffing, quality checks and order pricing
Question 17 – ✅ (a) fullness is even and matches the adjoining bodice edge
Question 18 – ✅ (b) test the fit and make corrections without removing a finished seam
Question 19 – ✅ (a) ₦1,000
Question 20 – ✅ (d) establish the correct neckline assembly for the collar facing
Question 21 – ✅ (c) accepting repeated loss-making orders without reviewing costs or quality
Question 22 – ✅ (b) Recheck the sleeve and armhole markings and distribute the intended ease correctly
Question 23 – ✅ (d) compare repayment obligations with realistic projected cash inflows
Question 24 – ✅ (b) Preparing, graining, folding and laying the patterns
Question 25 – ✅ (d) Trace the shirt pieces onto fresh pattern paper before changing their shapes
Question 26 – ✅ (b) permit fitting, correction and alignment before permanent joining
Question 27 – ✅ (a) ₦90,000
Question 28 – ✅ (c) Complete pattern tracing, adaptation, grainline marking and checking of the pieces
Question 29 – ✅ (d) stitch the corrected seam lines permanently and remove unnecessary tacking
Question 30 – ✅ (a) understating labour, electricity, rent and other production costs
Question 31 – ✅ (d) It helps flatten seam allowances and establish a controlled final appearance
Question 32 – ✅ (b) Slashing and spreading along planned lines
Question 33 – ✅ (a) the hem is level, correctly turned and prepared before stitching
Question 34 – ✅ (c) Estimating all bodice sizes without recording measurements
Question 35 – ✅ (d) alignment, adequate overlap or fastening and a secure finish
Question 36 – ✅ (c) Packaging the garment before examining its fit
Question 37 – ✅ (b) the fit of the front and back upper sections
Question 38 – ✅ (d) competent labour and production capacity
Question 39 – ✅ (c) Attach accurately to the neckline, turn, secure and press for a clean finish
Question 40 – ✅ (a) leaving loose threads and visible tacking in a finished garment
Theory Marking Scheme
Question 1 (10 Marks)
(a) Trace original onto fresh paper (1); introduce princess line (1); slash/spread as necessary (1); provide facing and fastening positions (1); transfer final markings (1).
(b) Grain direction (1); measurements (1); seam allowances (1); closure placement (1); trial layout and fabric quantity (1).
Question 2 (10 Marks)
(a) Measure and cut bodice (1); join shoulders (1); prepare facing/opening (1); distribute gathers (1); join skirt, sides and sleeves (1).
(b) Check sleeve pattern (1); align notches (1); compare armhole and sleeve cap (1); distribute intended ease (1); fit and adjust (1).
Question 3 (10 Marks)
(a) \(S-16000=0.20S\) (1); \(0.8S=16000\) (1); \(S=₦20,000\) (1); 20% markup price ₦19,200 (1); correct denominator distinction (1).
(b) Rent ₦1,000 per order (1); fabric (1); accessories (1); labour (1); electricity or equipment depreciation (1).
Question 4 (10 Marks)
(a) Tack and fit (1); correct seams (1); sew permanently (1); finish hem and loose threads (1); press/package (1).
(b) Production demand (1); machine cost (1); working capital (1); repayment obligations (1); realistic cash-flow estimate (1).

Community Join the conversation Open discussion +